System Requirements / ActiveImage Protector
- ActiveImage Protector
ActiveImage Protector
Check the products you want to see system requirements.
ActiveImage Protector 2022 Server
Hardware
CPU :
Pentium 4 or above
Main Memory :
2GB or above
Hard Disk :
650MB or more of available disk space
- Installation of the related products requires available space for the respective products.
DVD-ROM Drive :
Required to install the product and boot up the ActiveImage Protector Boot Environment.
Internet connection :
Required for online activation of the product, issuing a license file and installation of the latest updates
Operating System
Windows：
- Windows Server 2022
- Windows Server 2019
- Windows Server 2016
- Windows Server 2012 R2
- Windows Server IoT 2019/2022 for Storage
- Windows Storage Server 2016
- Windows Storage Server 2012 R2
- Later than Windows 10 1803（x64）,including Windows 11
Hypervisor：
- Windows Server 2022 Hyper-V
- Windows Server 2019 Hyper-V
- Windows Server 2016 Hyper-V
- Windows Server 2012/2012 R2 Hyper-V
- VMware vSphere ESX[i] 5.1 / 5.5 / 6.0 / 6.5 / 6.7/ 7.0
- Citrix Hypervisor 8.2
- Proxmox VE 7.2-1
- Nutanix Acropolis Hypervisor (AHV) 20190916.276
- The operating systems above stated as guest OS of virtual machines on the respective hypervisors are also supported.
- As for the backup source OS for HyperAgent, please refer to our knowledge Base
- HyperAgent feature is not available on ActiveImage Protector Server vPack. and IT Pro.
- HyperBack (agentless backup) feature is not available on Citrix Hypervisor、Proxmox VE and Nutanix AHV.
- For the support information about the other hypervisors, please contact us.
File System
Hot Imaging Backup :
FAT16, FAT16X, FAT32, FAT32X, NTFS, ReFS
- The above listed file systems on MBR and GPT disks are supported.
- Support for the above mentioned file systems of virtual disks on Storage Space configured with Windows 8 or later OS.
- ReZooming a virtual machine created in ReFS is not supported.
Cold Imaging in Boot Environment（Linux）:(except for IT Pro)
FAT16, FAT16X, FAT32, FAT32X, NTFS, Linux Ext2, Linux Ext3, Linux Ext4, Linux Swap, Linux LVM
- Actiphy Boot Environment Builder supports building “Boot Environment.”
Cold Imaging in Actiphy Boot Environment（Windows RE/PE）or RescueBoot :
FAT16, FAT16X, FAT32, FAT32X, NTFS, exFAT, ReFS, Linux Ext2, Linux Ext3, Linux Ext4
- RescueBoot is not available for ActiveImage Protector IT Pro.
- Backup and Recovery of Linux are not supported with ActiveImage Protector IT Pro
- File system on Storage Space and ReFS are supported only if the boot environment is created by using Windows ADK that supports the file system.
- Actiphy Boot Environment Builder or ActiveImage Protector IT Pro Creator support building “Boot Environment”.
Backup Destination
- Local Disk（Internal /External）：HDD / SSD with ATA / SATA / eSATA / SCSI / SAS / FireWire (IEEE 1394) connection、Virtual hard disk created on the storage space
- Network Drive: Network drive with NAS（Network shared folders compatible with file sharing SMB/CIFS protocol , shared folders of Windows OS and Samba） / iSCSI / SAN connection
- Cloud Storage：Amazon S3、Azure Storage、S3 compatible object storage（Nifty Cloud、Cloudian）、Wasabi
- HDD / SSD / RDX / Flash memory with USB connection
- LTO（magnetic tape）
- SFTP Server
- Storage media of which the sector size is 512 bytes or more is supported.
- SAN (fibre channel) can be used only when the driver is loaded in the boot environment.
- LTO tape is not supported for ActiveImage Protector Desktop/Linux/Server vPack.
- When using ActiveImage Protector Virtual, physical machine with HyperAgent installed can backup to LTO tape.
- As for verified LTO device List, please refer to Knowledge Base
Replication to Secondary Destination（Post Backup Process / ImageCenter）
- Local Disk（Internal /External）：HDD / SSD with ATA / SATA / eSATA / SCSI / SAS / FireWire (IEEE 1394) connection、Virtual hard disk created on the storage space
- Network Drive: Network drive with NAS（Network shared folders compatible with file sharing SMB/CIFS protocol , shared folders of Windows OS and Samba） / iSCSI / SAN connection
- Cloud Storage：Amazon S3、Azure Storage、S3 compatible object storage（Nifty Cloud、Cloudian）、Wasabi、OneDrive、Dropbox、Google Drive
- HDD / SSD / RDX / flash memory with USB connection
- SFTP / FTP / WebDAV（https / http）Server
- Storage media of which the sector size is 512 bytes or more is supported.
- SAN (fibre channel) can be used only when the driver is loaded in the boot environment.
- Replication to Wasabi is not supported on ImageCenter
Others
Deduplication :
- A volume with available space of 1% or more of the total volume size of the backup source is required as the working area other than the storage space for the backup image files.
- CPU: Dual core processor or above (recommended)
- Main Memory: 8GB or above (recommended)
- Intel Itanium（IA-64）based systems are not supported.
HyperBack / HyperRecovery (when using ActiveImage Protector Server / Virtual ) :
- Dual Core or above CPU (recommended)
- 4GB or more of main memory (recommended)
- 1Gbps-capable NIC or above
Building RescueBoot :
Windows 10 1803(x64) or later Windows Desktop OS, Windows Server 2016 or later Windows Server OS
Actiphy Boot Environment（Windows PE / RE）
Main Memory :
2GB or above
DVD-ROM Drive :
Required to install the product and boot up the ActiveImage Protector Boot Environment.
Others :
System requirements for Deduplication feature are as follows:
- A volume with available space of 1% or more of the total volume size of the backup source as the working area to back up using deduplication other than the storage space for backup image files.
- CPU: Dual core processor or above (recommended)
- Main Memory: 8GB or above (recommended)
- Intel Itanium（IA-64）based systems are not supported.
File System :
FAT16, FAT32, NTFS, exFAT, ReFS, Linux Ext2, Linux Ext3, Linux Ext4, Linux Swap
- The above file systems on MBR and GPT disks are supported.
- File system on Storage Space and ReFS are supported only if the boot environment is created by using Windows ADK that supports the file system.
- exFAT is supported with full-sector backup
Backup Destination :
- Local Disk（Internal /External）：HDD / SSD with ATA / SATA / eSATA / SCSI / SAS / FireWire (IEEE 1394) connection、Virtual hard disk created on the storage space
- Network Drive: Network drive with NAS（Network shared folders compatible with file sharing SMB/CIFS protocol , shared folders of Windows OS and Samba） / SAN connection
- Cloud Storage：Amazon S3、Azure Storage、S3 compatible object storage (Nifty Cloud, Cloudian)、Wasabi
- HDD / SSD / RDX / Flash memory with USB connection
- LTO（magnetic tape）
- SFTP Server
- Storage media of which the sector size is 512 bytes or more is supported.
- SAN (fibre channel) can be used only when the driver is loaded in the boot environment.
- LTO is not supported for ActiveImage Protector Desktop / Linux / Server vPack.
- As for verified LTO device, please refer to Knowledge Base
- As for the supported destination storage when backing up in boot environment, please refer to Knowledge Base
Actiphy Boot Environment（Linux）
Main Memory :
2GB or above
DVD-ROM Drive :
Required to install the product and boot up the ActiveImage Protector Boot Environment.
Others :
System requirements for Deduplication feature are as follows:
- A volume with available space of 1% or more of the total volume size of the backup source as the working area to back up using deduplication other than the storage space for backup image files.
- CPU: Dual core processor or above (recommended)
- Main Memory: 8GB or above (recommended)
- Intel Itanium（IA-64）based systems are not supported.
File System :
FAT16, FAT32, NTFS, Linux Ext2, Linux Ext3, Linux Ext4, Linux Swap, Linux LVM, XFS, VMFS5（Smart Sector backup for 2TB or less）, VMFS6（Full Sector backup only）
- Cold backup supports ESXi 6.5 / 6.7 / 7.0
- The above file systems on MBR and GPT disks are supported.
- The above mentioned file systems of virtual disks on Storage Space configured with Windows 8 or later are supported.
Backup Destination :
- Local Disk（Internal /External）：HDD / SSD with ATA / SATA / eSATA / SCSI / SAS / FireWire (IEEE 1394) connection、Virtual hard disk created on the storage space
- Network Drive: Network drive with NAS（Network shared folders compatible with file sharing SMB/CIFS protocol , shared folders of Windows OS and Samba） / iSCSI / SAN connection
- Cloud Storage：Amazon S3, Azure Storage, S3 compatible object storage (Nifty Cloud, Cloudian)、Wasabi
- HDD / SSD / RDX / Flash memory with USB connection
- SFTP Server
- Please refer here to check how to use iSCSI.
- SAN (fibre channel) can be used only when the driver is loaded in the boot environment.
- As for the supported destination storage when backing up in boot environment, please refer to Knowledge Base
- As for mounting nfs share in CentOS-based boot environment, please refer to Knowledge Base
Actiphy Boot Environment Builder
CPU :
Pentium 4 or above
Main Memory :
1024MB or above
Hard Disk :
2048 MB or more of available disk space
Internet Connection :
Required for update of the product
- If you use a proxy server for internet access, click on [?] and configure the proxy settings.
Screen Resolution :
1152 x 864 (XGA+) or above. Display scale is 100%.
Operating System :
Windows 10 (x64) or later version of Windows Desktop OS, Windows Server 2012 R2 or later version of Windows Server OS
- Using Windows RE with the BE Builder fails to create a boot environment on Windows Server 2012 R2 or in an environment where recovery partitions are not present.
Windows ADK :
ADK for Windows 10, Version 1703 or later (ADK for Windows 11, Version 22H2 is not supported.)
The following components are required:
- Deployment Tools
- Windows Preinstallation Environment（Windows PE）
If the Windows ADK for Windows 10 1809 or later was downloaded, please install the Windows Preinstallation Environment (Windows PE) from “Windows PE Add-on for the ADK”.
ActiveImage Protector 2022 Desktop
Hardware
CPU :
Pentium 4 or above
Main Memory :
2GB or above
Hard Disk :
650MB or more of available disk space
- Installation of the related products requires available space for the respective products.
DVD-ROM Drive :
Required to install the product and boot up the ActiveImage Protector Boot Environment.
Internet connection :
Required for online activation of the product, issuing a license file and installation of the latest updates
Operating System
Windows 10 1803 (x64) or later Windows Desktop OS including Windows 11
File System
Hot Imaging Backup :
FAT16, FAT16X, FAT32, FAT32X, NTFS
- The above listed file systems on MBR and GPT disks are supported.
- Support for the above mentioned file systems of virtual disks on Storage Space configured with Windows 8 or later OS.
Cold Imaging in ActiveImage Protector Boot Environment（Linux）:
FAT16, FAT16X, FAT32, FAT32X, NTFS, Linux Ext2, Linux Ext3, Linux Ext4, Linux Swap, Linux LVM
Cold Imaging in ActiveImage Protector Boot Environment（Windows PE）:
FAT16, FAT16X, FAT32, FAT32X, NTFS, exFAT, ReFS, Linux Ext2, Linux Ext3, Linux Ext4
- exFAT is supported only for full sector backup
- File system on Storage Space and ReFS are supported only if the boot environment is created by using Windows ADK that supports the file system.
Backup Destination
- Local Disk（Internal /External）：HDD / SSD with ATA / SATA / eSATA / SCSI / SAS / FireWire (IEEE 1394) connection、Virtual hard disk created on the storage space
- Network Drive: Network drive with NAS（Network shared folders compatible with file sharing SMB/CIFS protocol , shared folders of Windows OS and Samba） / iSCSI / SAN connection
- Cloud Storage：Amazon S3、Azure Storage、S3 compatible object storage（Nifty Cloud、Cloudian）、Wasabi
- HDD / SSD / RDX / Flash memory with USB connection
- LTO（magnetic tape）
- SFTP Server
- Storage media of which the sector size is 512 bytes or more is supported.
- SAN (fibre channel) can be used only when the driver is loaded in the boot environment.
- LTO tape is not supported for ActiveImage Protector Desktop/Linux/Server vPack.
- When using ActiveImage Protector Virtual, physical machine with HyperAgent installed can backup to LTO tape.
- As for verified LTO device List, please refer to Knowledge Base
Replication to Secondary Destination (Post Backup Process / ImageCenter)
- Local Disk（Internal /External）：HDD / SSD with ATA / SATA / eSATA / SCSI / SAS / FireWire (IEEE 1394) connection、Virtual hard disk created on the storage space
- Network Drive: Network drive with NAS（Network shared folders compatible with file sharing SMB/CIFS protocol , shared folders of Windows OS and Samba） / iSCSI / SAN connection
- Cloud Storage：Amazon S3、Azure Storage、S3 compatible object storage（Nifty Cloud、Cloudian）、Wasabi、OneDrive、Dropbox、Google Drive
- HDD / SSD / RDX / flash memory with USB connection
- SFTP / FTP / WebDAV（https / http）Server
- Storage media of which the sector size is 512 bytes or more is supported.
- SAN (fibre channel) can be used only when the driver is loaded in the boot environment.
- Replication to Wasabi is not supported on ImageCenter
Others
Deduplication :
- A volume with available space of 1% or more of the total volume size of the backup source is required as the working area other than the storage space for the backup image files.
- CPU: Dual core processor or above (recommended)
- Main Memory: 8GB or above (recommended)
- Intel Itanium（IA-64）based systems are not supported.
HyperBack / HyperRecovery (when using ActiveImage Protector Server / Virtual ) :
- Dual Core or above CPU (recommended)
- 4GB or more of main memory (recommended)
- 1Gbps-capable NIC or above
Building RescueBoot :
Windows 10 1803(x64) or later Windows Desktop OS, Windows Server 2016 or later Windows Server OS
Actiphy Boot Environment（Windows PE / RE）
Main Memory :
2GB or above
DVD-ROM Drive :
Required to install the product and boot up the ActiveImage Protector Boot Environment.
Others :
System requirements for Deduplication feature are as follows:
- A volume with available space of 1% or more of the total volume size of the backup source as the working area to back up using deduplication other than the storage space for backup image files.
- CPU: Dual core processor or above (recommended)
- Main Memory: 8GB or above (recommended)
- Intel Itanium（IA-64）based systems are not supported.
File System :
FAT16, FAT32, NTFS, exFAT, ReFS, Linux Ext2, Linux Ext3, Linux Ext4, Linux Swap
- The above file systems on MBR and GPT disks are supported.
- File system on Storage Space and ReFS are supported only if the boot environment is created by using Windows ADK that supports the file system.
- exFAT is supported with full-sector backup
Backup Destination :
- Local Disk（Internal /External）：HDD / SSD with ATA / SATA / eSATA / SCSI / SAS / FireWire (IEEE 1394) connection、Virtual hard disk created on the storage space
- Network Drive: Network drive with NAS（Network shared folders compatible with file sharing SMB/CIFS protocol , shared folders of Windows OS and Samba） / SAN connection
- Cloud Storage：Amazon S3、Azure Storage、S3 compatible object storage (Nifty Cloud, Cloudian)、Wasabi
- HDD / SSD / RDX / Flash memory with USB connection
- LTO（magnetic tape）
- SFTP Server
- Storage media of which the sector size is 512 bytes or more is supported.
- SAN (fibre channel) can be used only when the driver is loaded in the boot environment.
- LTO is not supported for ActiveImage Protector Desktop / Linux / Server vPack.
- As for verified LTO device, please refer to Knowledge Base
- As for the supported destination storage when backing up in boot environment, please refer to Knowledge Base
Actiphy Boot Environment（Linux）
Main Memory :
2GB or above
DVD-ROM Drive :
Required to install the product and boot up the ActiveImage Protector Boot Environment.
Others :
System requirements for Deduplication feature are as follows:
- A volume with available space of 1% or more of the total volume size of the backup source as the working area to back up using deduplication other than the storage space for backup image files.
- CPU: Dual core processor or above (recommended)
- Main Memory: 8GB or above (recommended)
- Intel Itanium（IA-64）based systems are not supported.
File System :
FAT16, FAT32, NTFS, Linux Ext2, Linux Ext3, Linux Ext4, Linux Swap, Linux LVM, XFS, VMFS5（Smart Sector backup for 2TB or less）, VMFS6（Full Sector backup only）
- Cold backup supports ESXi 6.5 / 6.7 / 7.0
- The above file systems on MBR and GPT disks are supported.
- The above mentioned file systems of virtual disks on Storage Space configured with Windows 8 or later are supported.
Backup Destination :
- Local Disk（Internal /External）：HDD / SSD with ATA / SATA / eSATA / SCSI / SAS / FireWire (IEEE 1394) connection、Virtual hard disk created on the storage space
- Network Drive: Network drive with NAS（Network shared folders compatible with file sharing SMB/CIFS protocol , shared folders of Windows OS and Samba） / iSCSI / SAN connection
- Cloud Storage：Amazon S3, Azure Storage, S3 compatible object storage (Nifty Cloud, Cloudian)、Wasabi
- HDD / SSD / RDX / Flash memory with USB connection
- SFTP Server
- Please refer here to check how to use iSCSI.
- SAN (fibre channel) can be used only when the driver is loaded in the boot environment.
- As for the supported destination storage when backing up in boot environment, please refer to Knowledge Base
- As for mounting nfs share in CentOS-based boot environment, please refer to Knowledge Base
Actiphy Boot Environment Builder
CPU :
Pentium 4 or above
Main Memory :
1024MB or above
Hard Disk :
2048 MB or more of available disk space
Internet Connection :
Required for update of the product
- If you use a proxy server for internet access, click on [?] and configure the proxy settings.
Screen Resolution :
1152 x 864 (XGA+) or above. Display scale is 100%.
Operating System :
Windows 10 (x64) or later version of Windows Desktop OS, Windows Server 2012 R2 or later version of Windows Server OS
- Using Windows RE with the BE Builder fails to create a boot environment on Windows Server 2012 R2 or in an environment where recovery partitions are not present.
Windows ADK :
ADK for Windows 10, Version 1703 or later (ADK for Windows 11, Version 22H2 is not supported.)
The following components are required:
- Deployment Tools
- Windows Preinstallation Environment（Windows PE）
If the Windows ADK for Windows 10 1809 or later was downloaded, please install the Windows Preinstallation Environment (Windows PE) from “Windows PE Add-on for the ADK”.
ActiveImage Protector 2022 Linux
Hardware
CPU :
Pentium 4 or above
Main Memory :
2GB or above
- 3GB is recommended for “RescureBoot”.
Hard Disk :
- 2GB or more of available hard disk space is required at setup.
- 7 GB or more of available hard disk space is required for building AIP Boot Environment. 512 MB or more of available hard disk space is required when Boot Environment is not included.
- 10% of available space in the respective volumes for change tracking to take snapshots and incremental backups.
- To run backup tasks using the Deduplication Compression feature, reserving 1% or more of the total data of the backup source for saving the temporary working files in a volume that should not be included in the backup source is required.
DVD-ROM Drive :
Required to install the product and boot up the ActiveImage Protector Boot Environment.
Note :
- ActiveImage Protector Linux Edition supports only x86_64 architecture.
- Secure Boot is not supported.
Internet connection :
Required for online activation of the product
Operating System
- Red Hat Enterprise Linux：8.0 – 8.7 / 7.0 – 7.9 / 6.0 – 6.10（x86_64）
- CentOS：8.1 – 8.4 / 7.0 – 7.9 / 6.0 – 6.10（x86_64）
- Oracle Linux：8.1 – 8.7 / 7.0 – 7.9 / 6.0 – 6.10（x86_64）
- AlmaLinux 8.3 – 8.7
- MIRACLE LINUX 8.4 / 8.6
- Rocky Linux 8.3 – 8.7
- Amazon Linux 2
- SUSE Linux Enterprise Server 15 / Desktop 15
- openSUSE Leap 15
- The above OSs require internet connection
- Ubuntu 18.04LTS / 20.04LTS / 22.04LTS
- Debian 9 – 11
Notes on installation of the product：
Before setting up ActiveImage Protector, please make sure the required packages and drivers are installed.
- Please refer here for more information.
Backup Destination
- Local Disk（Internal /External）：HDD / SSD with ATA / SATA / eSATA / SCSI / SAS / FireWire (IEEE 1394) connection、Virtual hard disk created on the storage space
- Network Drive: Network drive with NAS（Network shared folders compatible with file sharing SMB/CIFS protocol , shared folders of Windows OS and Samba） / iSCSI / SAN connection
- Cloud Storage：Amazon S3、Azure Storage、S3 compatible object storage（Nifty Cloud、Cloudian）、Wasabi
- HDD / SSD / RDX / Flash memory with USB connection
- LTO（magnetic tape）
- SFTP Server
- Storage media of which the sector size is 512 bytes or more is supported.
- SAN (fibre channel) can be used only when the driver is loaded in the boot environment.
- LTO tape is not supported for ActiveImage Protector Desktop/Linux/Server vPack.
- When using ActiveImage Protector Virtual, physical machine with HyperAgent installed can backup to LTO tape.
- As for verified LTO device List, please refer to Knowledge Base
Replication to Secondary Destination (Post Backup Process / ImageCenter)
- Local Disk（Internal /External）：HDD / SSD with ATA / SATA / eSATA / SCSI / SAS / FireWire (IEEE 1394) connection、Virtual hard disk created on the storage space
- Network Drive: Network drive with NAS（Network shared folders compatible with file sharing SMB/CIFS protocol , shared folders of Windows OS and Samba） / iSCSI / SAN connection
- Cloud Storage：Amazon S3、Azure Storage、S3 compatible object storage（Nifty Cloud、Cloudian）、Wasabi、OneDrive、Dropbox、Google Drive
- HDD / SSD / RDX / flash memory with USB connection
- SFTP / FTP / WebDAV（https / http）Server
- Storage media of which the sector size is 512 bytes or more is supported.
- SAN (fibre channel) can be used only when the driver is loaded in the boot environment.
- Replication to Wasabi is not supported on ImageCenter
Supported File System
Linux Ext2, Linux Ext3, Linux Ext4, XFS, Linux Swap, Linux LVM (volume group and logical volume), Linux RAID
- Linux RAID is not supported if RAID is configured by using dmraid.
- Bare metal recovery of Linux RAID by using mdraid is not supported.
- Backup of Linux disk with no partitions is not supported.
Windows console for remote management capabilities
The ActiveImage Protector Linux comes with the ActiveImage Console which provides remote management capabilities and operates ActiveImage Protector installed on Linux systems from a Windows OS even when X Windows is not configured.
Supported Windows OS：
- Windows 10（x64）or later Windows Desktop OS
- WindowsServer 2012 R2 or later Windows Server OS
Actiphy Boot Environment (Linux)
Main Memory :
2GB or above
DVD-ROM Drive :
Required to install the product and boot up the ActiveImage Protector Boot Environment.
Others :
System requirements for Deduplication feature are as follows:
- A volume with available space of 1% or more of the total volume size of the backup source as the working area to back up using deduplication other than the storage space for backup image files.
- CPU: Dual core processor or above (recommended)
- Main Memory: 8GB or above (recommended)
- Intel Itanium（IA-64）based systems are not supported.
File System :
FAT16, FAT32, NTFS, Linux Ext2, Linux Ext3, Linux Ext4, Linux Swap, Linux LVM, XFS, VMFS5（Smart Sector backup for 2TB or less）, VMFS6（Full Sector backup only）
- Cold backup supports ESXi 6.5 / 6.7 / 7.0
- The above file systems on MBR and GPT disks are supported.
- The above mentioned file systems of virtual disks on Storage Space configured with Windows 8 or later are supported.
Backup Destination :
- Local Disk（Internal /External）：HDD / SSD with ATA / SATA / eSATA / SCSI / SAS / FireWire (IEEE 1394) connection、Virtual hard disk created on the storage space
- Network Drive: Network drive with NAS（Network shared folders compatible with file sharing SMB/CIFS protocol , shared folders of Windows OS and Samba） / iSCSI / SAN connection
- Cloud Storage：Amazon S3, Azure Storage, S3 compatible object storage (Nifty Cloud, Cloudian)、Wasabi
- HDD / SSD / RDX / Flash memory with USB connection
- SFTP Server
- Please refer here to check how to use iSCSI.
- SAN (fibre channel) can be used only when the driver is loaded in the boot environment.
- As for the supported destination storage when backing up in boot environment, please refer to Knowledge Base
- As for mounting nfs share in CentOS-based boot environment, please refer to Knowledge Base
ActiveImage Protector 2022 Virtual
Hardware（Windows）
CPU :
Pentium 4 or above
Main Memory :
2GB or above
Hard Disk :
650MB or more of available disk space
- Installation of the related products requires available space for the respective products.
DVD-ROM Drive :
Required to install the product and boot up the ActiveImage Protector Boot Environment.
Internet connection :
Required for online activation of the product, issuing a license file and installation of the latest updates
Hardware（Linux）
CPU :
Pentium 4 or above
Main Memory :
2GB or above
- 3GB is recommended for “RescureBoot”.
Hard Disk :
- 2GB or more of available hard disk space is required at setup.
- 7 GB or more of available hard disk space is required for building AIP Boot Environment. 512 MB or more of available hard disk space is required when Boot Environment is not included.
- 10% of available space in the respective volumes for change tracking to take snapshots and incremental backups.
- To run backup tasks using the Deduplication Compression feature, reserving 1% or more of the total data of the backup source for saving the temporary working files in a volume that should not be included in the backup source is required.
DVD-ROM Drive :
Required to install the product and boot up the ActiveImage Protector Boot Environment.
Note :
- ActiveImage Protector Linux Edition supports only x86_64 architecture.
- Secure Boot is not supported.
Internet connection :
Required for online activation of the product
Operating System（Windows）
Windows：
- Windows Server 2022
- Windows Server 2019
- Windows Server 2016
- Windows Server 2012 R2
- Windows Server IoT 2019/2022 for Storage
- Windows Storage Server 2016
- Windows Storage Server 2012 R2
- Later than Windows 10 1803（x64）,including Windows 11
Hypervisor：
- Windows Server 2022 Hyper-V
- Windows Server 2019 Hyper-V
- Windows Server 2016 Hyper-V
- Windows Server 2012/2012 R2 Hyper-V
- VMware vSphere ESX[i] 5.1 / 5.5 / 6.0 / 6.5 / 6.7/ 7.0
- Citrix Hypervisor 8.2
- Proxmox VE 7.2-1
- Nutanix Acropolis Hypervisor (AHV) 20190916.276
- The operating systems above stated as guest OS of virtual machines on the respective hypervisors are also supported.
- As for the backup source OS for HyperAgent, please refer to our knowledge Base
- HyperAgent feature is not available on ActiveImage Protector Server vPack. and IT Pro.
- HyperBack (agentless backup) feature is not available on Citrix Hypervisor、Proxmox VE and Nutanix AHV.
- For the support information about the other hypervisors, please contact us.
Operating System（Linux）
- Red Hat Enterprise Linux：8.0 – 8.7 / 7.0 – 7.9 / 6.0 – 6.10（x86_64）
- CentOS：8.1 – 8.4 / 7.0 – 7.9 / 6.0 – 6.10（x86_64）
- Oracle Linux：8.1 – 8.7 / 7.0 – 7.9 / 6.0 – 6.10（x86_64）
- AlmaLinux 8.3 – 8.7
- MIRACLE LINUX 8.4 / 8.6
- Rocky Linux 8.3 – 8.7
- Amazon Linux 2
- SUSE Linux Enterprise Server 15 / Desktop 15
- openSUSE Leap 15
- The above OSs require internet connection
- Ubuntu 18.04LTS / 20.04LTS / 22.04LTS
- Debian 9 – 11
Notes on installation of the product：
Before setting up ActiveImage Protector, please make sure the required packages and drivers are installed.
- Please refer here for more information.
File System（Windows）
Hot Imaging Backup :
FAT16, FAT16X, FAT32, FAT32X, NTFS, ReFS
- The above listed file systems on MBR and GPT disks are supported.
- Support for the above mentioned file systems of virtual disks on Storage Space configured with Windows 8 or later OS.
- ReZooming a virtual machine created in ReFS is not supported.
Cold Imaging in Boot Environment（Linux）:(except for IT Pro)
FAT16, FAT16X, FAT32, FAT32X, NTFS, Linux Ext2, Linux Ext3, Linux Ext4, Linux Swap, Linux LVM
- Actiphy Boot Environment Builder supports building “Boot Environment.”
Cold Imaging in Actiphy Boot Environment（Windows RE/PE）or RescueBoot :
FAT16, FAT16X, FAT32, FAT32X, NTFS, exFAT, ReFS, Linux Ext2, Linux Ext3, Linux Ext4
- RescueBoot is not available for ActiveImage Protector IT Pro.
- Backup and Recovery of Linux are not supported with ActiveImage Protector IT Pro
- File system on Storage Space and ReFS are supported only if the boot environment is created by using Windows ADK that supports the file system.
- Actiphy Boot Environment Builder or ActiveImage Protector IT Pro Creator support building “Boot Environment”.
File System（Linux）
Linux Ext2, Linux Ext3, Linux Ext4, XFS, Linux Swap, Linux LVM (volume group and logical volume), Linux RAID
- Linux RAID is not supported if RAID is configured by using dmraid.
- Bare metal recovery of Linux RAID by using mdraid is not supported.
- Backup of Linux disk with no partitions is not supported.
Backup Destination
- Local Disk（Internal /External）：HDD / SSD with ATA / SATA / eSATA / SCSI / SAS / FireWire (IEEE 1394) connection、Virtual hard disk created on the storage space
- Network Drive: Network drive with NAS（Network shared folders compatible with file sharing SMB/CIFS protocol , shared folders of Windows OS and Samba） / iSCSI / SAN connection
- Cloud Storage：Amazon S3、Azure Storage、S3 compatible object storage（Nifty Cloud、Cloudian）、Wasabi
- HDD / SSD / RDX / Flash memory with USB connection
- LTO（magnetic tape）
- SFTP Server
- Storage media of which the sector size is 512 bytes or more is supported.
- SAN (fibre channel) can be used only when the driver is loaded in the boot environment.
- LTO tape is not supported for ActiveImage Protector Desktop/Linux/Server vPack.
- When using ActiveImage Protector Virtual, physical machine with HyperAgent installed can backup to LTO tape.
- As for verified LTO device List, please refer to Knowledge Base
Replication to Secondary Destination (Post Backup Process / ImageCenter)
- Local Disk（Internal /External）：HDD / SSD with ATA / SATA / eSATA / SCSI / SAS / FireWire (IEEE 1394) connection、Virtual hard disk created on the storage space
- Network Drive: Network drive with NAS（Network shared folders compatible with file sharing SMB/CIFS protocol , shared folders of Windows OS and Samba） / iSCSI / SAN connection
- Cloud Storage：Amazon S3、Azure Storage、S3 compatible object storage（Nifty Cloud、Cloudian）、Wasabi、OneDrive、Dropbox、Google Drive
- HDD / SSD / RDX / flash memory with USB connection
- SFTP / FTP / WebDAV（https / http）Server
- Storage media of which the sector size is 512 bytes or more is supported.
- SAN (fibre channel) can be used only when the driver is loaded in the boot environment.
- Replication to Wasabi is not supported on ImageCenter
Others（Windows）
Deduplication :
- A volume with available space of 1% or more of the total volume size of the backup source is required as the working area other than the storage space for the backup image files.
- CPU: Dual core processor or above (recommended)
- Main Memory: 8GB or above (recommended)
- Intel Itanium（IA-64）based systems are not supported.
HyperBack / HyperRecovery (when using ActiveImage Protector Server / Virtual ) :
- Dual Core or above CPU (recommended)
- 4GB or more of main memory (recommended)
- 1Gbps-capable NIC or above
Building RescueBoot :
Windows 10 1803(x64) or later Windows Desktop OS, Windows Server 2016 or later Windows Server OS
Windows console for remote management capabilities（Linux）
The ActiveImage Protector Linux comes with the ActiveImage Console which provides remote management capabilities and operates ActiveImage Protector installed on Linux systems from a Windows OS even when X Windows is not configured.
Supported Windows OS：
- Windows 10（x64）or later Windows Desktop OS
- WindowsServer 2012 R2 or later Windows Server OS
Actiphy Boot Environment（Windows PE / RE）
Main Memory :
2GB or above
DVD-ROM Drive :
Required to install the product and boot up the ActiveImage Protector Boot Environment.
Others :
System requirements for Deduplication feature are as follows:
- A volume with available space of 1% or more of the total volume size of the backup source as the working area to back up using deduplication other than the storage space for backup image files.
- CPU: Dual core processor or above (recommended)
- Main Memory: 8GB or above (recommended)
- Intel Itanium（IA-64）based systems are not supported.
File System :
FAT16, FAT32, NTFS, exFAT, ReFS, Linux Ext2, Linux Ext3, Linux Ext4, Linux Swap
- The above file systems on MBR and GPT disks are supported.
- File system on Storage Space and ReFS are supported only if the boot environment is created by using Windows ADK that supports the file system.
- exFAT is supported with full-sector backup
Backup Destination :
- Local Disk（Internal /External）：HDD / SSD with ATA / SATA / eSATA / SCSI / SAS / FireWire (IEEE 1394) connection、Virtual hard disk created on the storage space
- Network Drive: Network drive with NAS（Network shared folders compatible with file sharing SMB/CIFS protocol , shared folders of Windows OS and Samba） / SAN connection
- Cloud Storage：Amazon S3、Azure Storage、S3 compatible object storage (Nifty Cloud, Cloudian)、Wasabi
- HDD / SSD / RDX / Flash memory with USB connection
- LTO（magnetic tape）
- SFTP Server
- Storage media of which the sector size is 512 bytes or more is supported.
- SAN (fibre channel) can be used only when the driver is loaded in the boot environment.
- LTO is not supported for ActiveImage Protector Desktop / Linux / Server vPack.
- As for verified LTO device, please refer to Knowledge Base
- As for the supported destination storage when backing up in boot environment, please refer to Knowledge Base
Actiphy Boot Environment（Linux）
Main Memory :
2GB or above
DVD-ROM Drive :
Required to install the product and boot up the ActiveImage Protector Boot Environment.
Others :
System requirements for Deduplication feature are as follows:
- A volume with available space of 1% or more of the total volume size of the backup source as the working area to back up using deduplication other than the storage space for backup image files.
- CPU: Dual core processor or above (recommended)
- Main Memory: 8GB or above (recommended)
- Intel Itanium（IA-64）based systems are not supported.
File System :
FAT16, FAT32, NTFS, Linux Ext2, Linux Ext3, Linux Ext4, Linux Swap, Linux LVM, XFS, VMFS5（Smart Sector backup for 2TB or less）, VMFS6（Full Sector backup only）
- Cold backup supports ESXi 6.5 / 6.7 / 7.0
- The above file systems on MBR and GPT disks are supported.
- The above mentioned file systems of virtual disks on Storage Space configured with Windows 8 or later are supported.
Backup Destination :
- Local Disk（Internal /External）：HDD / SSD with ATA / SATA / eSATA / SCSI / SAS / FireWire (IEEE 1394) connection、Virtual hard disk created on the storage space
- Network Drive: Network drive with NAS（Network shared folders compatible with file sharing SMB/CIFS protocol , shared folders of Windows OS and Samba） / iSCSI / SAN connection
- Cloud Storage：Amazon S3, Azure Storage, S3 compatible object storage (Nifty Cloud, Cloudian)、Wasabi
- HDD / SSD / RDX / Flash memory with USB connection
- SFTP Server
- Please refer here to check how to use iSCSI.
- SAN (fibre channel) can be used only when the driver is loaded in the boot environment.
- As for the supported destination storage when backing up in boot environment, please refer to Knowledge Base
- As for mounting nfs share in CentOS-based boot environment, please refer to Knowledge Base
Actiphy Boot Environment Builder
CPU :
Pentium 4 or above
Main Memory :
1024MB or above
Hard Disk :
2048 MB or more of available disk space
Internet Connection :
Required for update of the product
- If you use a proxy server for internet access, click on [?] and configure the proxy settings.
Screen Resolution :
1152 x 864 (XGA+) or above. Display scale is 100%.
Operating System :
Windows 10 (x64) or later version of Windows Desktop OS, Windows Server 2012 R2 or later version of Windows Server OS
- Using Windows RE with the BE Builder fails to create a boot environment on Windows Server 2012 R2 or in an environment where recovery partitions are not present.
Windows ADK :
ADK for Windows 10, Version 1703 or later (ADK for Windows 11, Version 22H2 is not supported.)
The following components are required:
- Deployment Tools
- Windows Preinstallation Environment（Windows PE）
If the Windows ADK for Windows 10 1809 or later was downloaded, please install the Windows Preinstallation Environment (Windows PE) from “Windows PE Add-on for the ADK”.
ActiveImage Protector 2022 Server vPack
Hardware（Windows）
CPU :
Pentium 4 or above
Main Memory :
2GB or above
Hard Disk :
650MB or more of available disk space
- Installation of the related products requires available space for the respective products.
DVD-ROM Drive :
Required to install the product and boot up the ActiveImage Protector Boot Environment.
Internet connection :
Required for online activation of the product, issuing a license file and installation of the latest updates
Hardware（Linux）
CPU :
Pentium 4 or above
Main Memory :
2GB or above
- 3GB is recommended for “RescureBoot”.
Hard Disk :
- 2GB or more of available hard disk space is required at setup.
- 7 GB or more of available hard disk space is required for building AIP Boot Environment. 512 MB or more of available hard disk space is required when Boot Environment is not included.
- 10% of available space in the respective volumes for change tracking to take snapshots and incremental backups.
- To run backup tasks using the Deduplication Compression feature, reserving 1% or more of the total data of the backup source for saving the temporary working files in a volume that should not be included in the backup source is required.
DVD-ROM Drive :
Required to install the product and boot up the ActiveImage Protector Boot Environment.
Note :
- ActiveImage Protector Linux Edition supports only x86_64 architecture.
- Secure Boot is not supported.
Internet connection :
Required for online activation of the product
Operating System（Windows）
Windows：
- Windows Server 2022
- Windows Server 2019
- Windows Server 2016
- Windows Server 2012 R2
- Windows Server IoT 2019/2022 for Storage
- Windows Storage Server 2016
- Windows Storage Server 2012 R2
- Later than Windows 10 1803（x64）,including Windows 11
Hypervisor：
- Windows Server 2022 Hyper-V
- Windows Server 2019 Hyper-V
- Windows Server 2016 Hyper-V
- Windows Server 2012/2012 R2 Hyper-V
- VMware vSphere ESX[i] 5.1 / 5.5 / 6.0 / 6.5 / 6.7/ 7.0
- Citrix Hypervisor 8.2
- Proxmox VE 7.2-1
- Nutanix Acropolis Hypervisor (AHV) 20190916.276
- The operating systems above stated as guest OS of virtual machines on the respective hypervisors are also supported.
- As for the backup source OS for HyperAgent, please refer to our knowledge Base
- HyperAgent feature is not available on ActiveImage Protector Server vPack. and IT Pro.
- HyperBack (agentless backup) feature is not available on Citrix Hypervisor、Proxmox VE and Nutanix AHV.
- For the support information about the other hypervisors, please contact us.
Operating System（Linux）
- Red Hat Enterprise Linux：8.0 – 8.7 / 7.0 – 7.9 / 6.0 – 6.10（x86_64）
- CentOS：8.1 – 8.4 / 7.0 – 7.9 / 6.0 – 6.10（x86_64）
- Oracle Linux：8.1 – 8.7 / 7.0 – 7.9 / 6.0 – 6.10（x86_64）
- AlmaLinux 8.3 – 8.7
- MIRACLE LINUX 8.4 / 8.6
- Rocky Linux 8.3 – 8.7
- Amazon Linux 2
- SUSE Linux Enterprise Server 15 / Desktop 15
- openSUSE Leap 15
- The above OSs require internet connection
- Ubuntu 18.04LTS / 20.04LTS / 22.04LTS
- Debian 9 – 11
Notes on installation of the product：
Before setting up ActiveImage Protector, please make sure the required packages and drivers are installed.
- Please refer here for more information.
File System
Hot Imaging Backup :
FAT16, FAT16X, FAT32, FAT32X, NTFS, ReFS
- The above listed file systems on MBR and GPT disks are supported.
- Support for the above mentioned file systems of virtual disks on Storage Space configured with Windows 8 or later OS.
- ReZooming a virtual machine created in ReFS is not supported.
Cold Imaging in Boot Environment（Linux）:(except for IT Pro)
FAT16, FAT16X, FAT32, FAT32X, NTFS, Linux Ext2, Linux Ext3, Linux Ext4, Linux Swap, Linux LVM
- Actiphy Boot Environment Builder supports building “Boot Environment.”
Cold Imaging in Actiphy Boot Environment（Windows RE/PE）or RescueBoot :
FAT16, FAT16X, FAT32, FAT32X, NTFS, exFAT, ReFS, Linux Ext2, Linux Ext3, Linux Ext4
- RescueBoot is not available for ActiveImage Protector IT Pro.
- Backup and Recovery of Linux are not supported with ActiveImage Protector IT Pro
- File system on Storage Space and ReFS are supported only if the boot environment is created by using Windows ADK that supports the file system.
- Actiphy Boot Environment Builder or ActiveImage Protector IT Pro Creator support building “Boot Environment”.
Backup Destination
- Local Disk（Internal /External）：HDD / SSD with ATA / SATA / eSATA / SCSI / SAS / FireWire (IEEE 1394) connection、Virtual hard disk created on the storage space
- Network Drive: Network drive with NAS（Network shared folders compatible with file sharing SMB/CIFS protocol , shared folders of Windows OS and Samba） / iSCSI / SAN connection
- Cloud Storage：Amazon S3、Azure Storage、S3 compatible object storage（Nifty Cloud、Cloudian）、Wasabi
- HDD / SSD / RDX / Flash memory with USB connection
- LTO（magnetic tape）
- SFTP Server
- Storage media of which the sector size is 512 bytes or more is supported.
- SAN (fibre channel) can be used only when the driver is loaded in the boot environment.
- LTO tape is not supported for ActiveImage Protector Desktop/Linux/Server vPack.
- When using ActiveImage Protector Virtual, physical machine with HyperAgent installed can backup to LTO tape.
- As for verified LTO device List, please refer to Knowledge Base
Replication to Secondary Destination (Post Backup Process / ImageCenter)
- Local Disk（Internal /External）：HDD / SSD with ATA / SATA / eSATA / SCSI / SAS / FireWire (IEEE 1394) connection、Virtual hard disk created on the storage space
- Network Drive: Network drive with NAS（Network shared folders compatible with file sharing SMB/CIFS protocol , shared folders of Windows OS and Samba） / iSCSI / SAN connection
- Cloud Storage：Amazon S3、Azure Storage、S3 compatible object storage（Nifty Cloud、Cloudian）、Wasabi、OneDrive、Dropbox、Google Drive
- HDD / SSD / RDX / flash memory with USB connection
- SFTP / FTP / WebDAV（https / http）Server
- Storage media of which the sector size is 512 bytes or more is supported.
- SAN (fibre channel) can be used only when the driver is loaded in the boot environment.
- Replication to Wasabi is not supported on ImageCenter
Others
Deduplication :
- A volume with available space of 1% or more of the total volume size of the backup source is required as the working area other than the storage space for the backup image files.
- CPU: Dual core processor or above (recommended)
- Main Memory: 8GB or above (recommended)
- Intel Itanium（IA-64）based systems are not supported.
HyperBack / HyperRecovery (when using ActiveImage Protector Server / Virtual ) :
- Dual Core or above CPU (recommended)
- 4GB or more of main memory (recommended)
- 1Gbps-capable NIC or above
Building RescueBoot :
Windows 10 1803(x64) or later Windows Desktop OS, Windows Server 2016 or later Windows Server OS
Actiphy Boot Environment（Windows PE / RE）
Main Memory :
2GB or above
DVD-ROM Drive :
Required to install the product and boot up the ActiveImage Protector Boot Environment.
Others :
System requirements for Deduplication feature are as follows:
- A volume with available space of 1% or more of the total volume size of the backup source as the working area to back up using deduplication other than the storage space for backup image files.
- CPU: Dual core processor or above (recommended)
- Main Memory: 8GB or above (recommended)
- Intel Itanium（IA-64）based systems are not supported.
File System :
FAT16, FAT32, NTFS, exFAT, ReFS, Linux Ext2, Linux Ext3, Linux Ext4, Linux Swap
- The above file systems on MBR and GPT disks are supported.
- File system on Storage Space and ReFS are supported only if the boot environment is created by using Windows ADK that supports the file system.
- exFAT is supported with full-sector backup
Backup Destination :
- Local Disk（Internal /External）：HDD / SSD with ATA / SATA / eSATA / SCSI / SAS / FireWire (IEEE 1394) connection、Virtual hard disk created on the storage space
- Network Drive: Network drive with NAS（Network shared folders compatible with file sharing SMB/CIFS protocol , shared folders of Windows OS and Samba） / SAN connection
- Cloud Storage：Amazon S3、Azure Storage、S3 compatible object storage (Nifty Cloud, Cloudian)、Wasabi
- HDD / SSD / RDX / Flash memory with USB connection
- LTO（magnetic tape）
- SFTP Server
- Storage media of which the sector size is 512 bytes or more is supported.
- SAN (fibre channel) can be used only when the driver is loaded in the boot environment.
- LTO is not supported for ActiveImage Protector Desktop / Linux / Server vPack.
- As for verified LTO device, please refer to Knowledge Base
- As for the supported destination storage when backing up in boot environment, please refer to Knowledge Base
Actiphy Boot Environment（Linux）
Main Memory :
2GB or above
DVD-ROM Drive :
Required to install the product and boot up the ActiveImage Protector Boot Environment.
Others :
System requirements for Deduplication feature are as follows:
- A volume with available space of 1% or more of the total volume size of the backup source as the working area to back up using deduplication other than the storage space for backup image files.
- CPU: Dual core processor or above (recommended)
- Main Memory: 8GB or above (recommended)
- Intel Itanium（IA-64）based systems are not supported.
File System :
FAT16, FAT32, NTFS, Linux Ext2, Linux Ext3, Linux Ext4, Linux Swap, Linux LVM, XFS, VMFS5（Smart Sector backup for 2TB or less）, VMFS6（Full Sector backup only）
- Cold backup supports ESXi 6.5 / 6.7 / 7.0
- The above file systems on MBR and GPT disks are supported.
- The above mentioned file systems of virtual disks on Storage Space configured with Windows 8 or later are supported.
Backup Destination :
- Local Disk（Internal /External）：HDD / SSD with ATA / SATA / eSATA / SCSI / SAS / FireWire (IEEE 1394) connection、Virtual hard disk created on the storage space
- Network Drive: Network drive with NAS（Network shared folders compatible with file sharing SMB/CIFS protocol , shared folders of Windows OS and Samba） / iSCSI / SAN connection
- Cloud Storage：Amazon S3, Azure Storage, S3 compatible object storage (Nifty Cloud, Cloudian)、Wasabi
- HDD / SSD / RDX / Flash memory with USB connection
- SFTP Server
- Please refer here to check how to use iSCSI.
- SAN (fibre channel) can be used only when the driver is loaded in the boot environment.
- As for the supported destination storage when backing up in boot environment, please refer to Knowledge Base
- As for mounting nfs share in CentOS-based boot environment, please refer to Knowledge Base
Actiphy Boot Environment Builder
CPU :
Pentium 4 or above
Main Memory :
1024MB or above
Hard Disk :
2048 MB or more of available disk space
Internet Connection :
Required for update of the product
- If you use a proxy server for internet access, click on [?] and configure the proxy settings.
Screen Resolution :
1152 x 864 (XGA+) or above. Display scale is 100%.
Operating System :
Windows 10 (x64) or later version of Windows Desktop OS, Windows Server 2012 R2 or later version of Windows Server OS
- Using Windows RE with the BE Builder fails to create a boot environment on Windows Server 2012 R2 or in an environment where recovery partitions are not present.
Windows ADK :
ADK for Windows 10, Version 1703 or later (ADK for Windows 11, Version 22H2 is not supported.)
The following components are required:
- Deployment Tools
- Windows Preinstallation Environment（Windows PE）
If the Windows ADK for Windows 10 1809 or later was downloaded, please install the Windows Preinstallation Environment (Windows PE) from “Windows PE Add-on for the ADK”.
ActiveImage Protector 2022 Cloud
Hardware
CPU：
Pentium 4 or above
Main Memory：
2GB or above
Hard Disk：
650MB or more of available disk space
- Installation of the related products requires available space for the respective products.
Internet connection：
Required for online activation of the product, issuing a license file and installation of the latest updates
Supported Cloud Service：
- Amazon Web Services（AWS）
- Microsoft Azure
Operating System
The following operating systems are supported on the virtual machine of Cloud Service.
Windows :
- Windows Server 2022
- Windows Server 2019
- Windows Server 2016
- Windows Server 2012 R2
- Windows 11
- Windows 10（x64）
Linux :
- Red Hat Enterprise Linux：8.0 – 8.6 / 7.0 – 7.9 / 6.0 – 6.10（x86_64）
- CentOS：8.1 – 8.4 / 7.0 – 7.9 / 6.0 – 6.10（x86_64）
- Oracle Linux：8.1 – 8.6 / 7.0 – 7.9 / 6.0 – 6.10（x86_64）
- AlmaLinux 8.3 – 8.6
- MIRACLE LINUX 8.4
- Rocky Linux 8.3 – 8.6
- Amazon Linux 2
- SUSE Linux Enterprise Server 15 / Desktop 15
- openSUSE Leap 15
- The above OSs require internet connection
- Ubuntu 18.04LTS / 20.04LTS / 22.04LTS
- Debian 9 – 11
Notes on installation of the product：
Before setting up ActiveImage Protector, please make sure the required packages and drivers are installed.
- Please refer here for more information.
File System
Hot Imaging Backup :
FAT16, FAT16X, FAT32, FAT32X, NTFS, CSVFS, ReFS
- The above listed file systems on MBR and GPT disks are supported.
- Support for the above mentioned file systems of virtual disks on Storage Space configured with Windows 8 or later OS.
- ReZooming a virtual machine created in ReFS is not supported.
Backup Destination
- Local virtual disk
- Network Drive：Network shared folder in cloud VLAN, compatible with SMB / CIFS file sharing protocol (Windows OS shared folder and Samba)
- Cloud Storage：Amazon S3、Azure Storage、S3 compatible object storage（Nifty Cloud、Cloudian）、Wasabi
Others
Deduplication :
- A volume with available space of 1% or more of the total volume size of the backup source is required as the working area other than the storage space for the backup image files.
- CPU: Dual core processor or above (recommended)
- Main Memory: 8GB or above (recommended)
- Intel Itanium（IA-64）based systems are not supported.
HyperBack / HyperRecovery (when using ActiveImage Protector Server / Virtual ) :
- Dual Core or above CPU (recommended)
- 4GB or more of main memory (recommended)
- 1Gbps-capable NIC or above
Building RescueBoot :
Windows 10 1803(x64) or later Windows Desktop OS, Windows Server 2016 or later Windows Server OS
ActiveImage Protector 2022 Cluster
Hardware
CPU :
Pentium 4 or above
Main Memory :
2GB or above
Hard Disk :
650MB or more of available disk space
- Installation of the related products requires available space for the respective products.
DVD-ROM Drive :
Required to install the product and boot up the ActiveImage Protector Boot Environment.
Internet connection :
Required for online activation of the product, issuing a license file and installation of the latest updates
Operating System
Windows :
- Windows Server 2022
- Windows Server 2019
- Windows Server 2016
- Windows Server 2012 R2
- Windows Storage Server 2016
- Windows Storage Server 2012 R2
Supported cluster product :
Windows Server Failover Clustering（MSFC）
File System
Hot Imaging Backup :
FAT16, FAT16X, FAT32, FAT32X, NTFS, CSVFS, ReFS
- The above listed file systems on MBR and GPT disks are supported.
- Support for the above mentioned file systems of virtual disks on Storage Space configured with Windows 8 or later OS.
Cold Imaging in ActiveImage Protector Boot Environment（Linux）:
FAT16, FAT16X, FAT32, FAT32X, NTFS, Linux Ext2, Linux Ext3, Linux Ext4, Linux Swap, Linux LVM
Cold Imaging in ActiveImage Protector Boot Environment（Windows PE）:
FAT16, FAT16X, FAT32, FAT32X, NTFS, exFAT, ReFS, Linux Ext2, Linux Ext3, Linux Ext4
- exFAT is supported only for full sector backup.
- File system on Storage Space and ReFS are supported only if the boot environment is created by using Windows ADK that supports the file system.
Backup Destination
- Local Disk（Internal /External）：HDD / SSD with ATA / SATA / eSATA / SCSI / SAS / FireWire (IEEE 1394) connection、Virtual hard disk created on the storage space
- Network Drive: Network drive with NAS（Network shared folders compatible with file sharing SMB/CIFS protocol , shared folders of Windows OS and Samba） / iSCSI / SAN connection
- Cloud Storage：Amazon S3、Azure Storage、S3 compatible object storage（Nifty Cloud、Cloudian）、Wasabi
- HDD / SSD / RDX / Flash memory with USB connection
- LTO（magnetic tape）
- SFTP Server
- Storage media of which the sector size is 512 bytes or more is supported.
- SAN (fibre channel) can be used only when the driver is loaded in the boot environment.
- LTO tape is not supported for ActiveImage Protector Desktop/Linux/Server vPack.
- When using ActiveImage Protector Virtual, physical machine with HyperAgent installed can backup to LTO tape.
- As for verified LTO device List, please refer to Knowledge Base
Replication to Secondary Destination (Post Backup Process / ImageCenter)
- Local Disk（Internal /External）：HDD / SSD with ATA / SATA / eSATA / SCSI / SAS / FireWire (IEEE 1394) connection、Virtual hard disk created on the storage space
- Network Drive: Network drive with NAS（Network shared folders compatible with file sharing SMB/CIFS protocol , shared folders of Windows OS and Samba） / iSCSI / SAN connection
- Cloud Storage：Amazon S3、Azure Storage、S3 compatible object storage（Nifty Cloud、Cloudian）、Wasabi、OneDrive、Dropbox、Google Drive
- HDD / SSD / RDX / flash memory with USB connection
- SFTP / FTP / WebDAV（https / http）Server
- Storage media of which the sector size is 512 bytes or more is supported.
- SAN (fibre channel) can be used only when the driver is loaded in the boot environment.
- Replication to Wasabi is not supported on ImageCenter
Others
Deduplication :
- A volume with available space of 1% or more of the total volume size of the backup source is required as the working area other than the storage space for the backup image files.
- CPU: Dual core processor or above (recommended)
- Main Memory: 8GB or above (recommended)
- Intel Itanium（IA-64）based systems are not supported.
HyperBack / HyperRecovery (when using ActiveImage Protector Server / Virtual ) :
- Dual Core or above CPU (recommended)
- 4GB or more of main memory (recommended)
- 1Gbps-capable NIC or above
Building RescueBoot :
Windows 10 1803(x64) or later Windows Desktop OS, Windows Server 2016 or later Windows Server OS
Actiphy Boot Environment (Windows PE / RE)
Main Memory :
2GB or above
DVD-ROM Drive :
Required to install the product and boot up the ActiveImage Protector Boot Environment.
Others :
System requirements for Deduplication feature are as follows:
- A volume with available space of 1% or more of the total volume size of the backup source as the working area to back up using deduplication other than the storage space for backup image files.
- CPU: Dual core processor or above (recommended)
- Main Memory: 8GB or above (recommended)
- Intel Itanium（IA-64）based systems are not supported.
File System :
FAT16, FAT32, NTFS, exFAT, ReFS, Linux Ext2, Linux Ext3, Linux Ext4, Linux Swap
- The above file systems on MBR and GPT disks are supported.
- File system on Storage Space and ReFS are supported only if the boot environment is created by using Windows ADK that supports the file system.
- exFAT is supported with full-sector backup
Backup Destination :
- Local Disk（Internal /External）：HDD / SSD with ATA / SATA / eSATA / SCSI / SAS / FireWire (IEEE 1394) connection、Virtual hard disk created on the storage space
- Network Drive: Network drive with NAS（Network shared folders compatible with file sharing SMB/CIFS protocol , shared folders of Windows OS and Samba） / SAN connection
- Cloud Storage：Amazon S3、Azure Storage、S3 compatible object storage (Nifty Cloud, Cloudian)、Wasabi
- HDD / SSD / RDX / Flash memory with USB connection
- LTO（magnetic tape）
- SFTP Server
- Storage media of which the sector size is 512 bytes or more is supported.
- SAN (fibre channel) can be used only when the driver is loaded in the boot environment.
- LTO is not supported for ActiveImage Protector Desktop / Linux / Server vPack.
- As for verified LTO device, please refer to Knowledge Base
- As for the supported destination storage when backing up in boot environment, please refer to Knowledge Base
Actiphy Boot Environment (Linux)
Main Memory :
2GB or above
DVD-ROM Drive :
Required to install the product and boot up the ActiveImage Protector Boot Environment.
Others :
System requirements for Deduplication feature are as follows:
- A volume with available space of 1% or more of the total volume size of the backup source as the working area to back up using deduplication other than the storage space for backup image files.
- CPU: Dual core processor or above (recommended)
- Main Memory: 8GB or above (recommended)
- Intel Itanium（IA-64）based systems are not supported.
File System :
FAT16, FAT32, NTFS, Linux Ext2, Linux Ext3, Linux Ext4, Linux Swap, Linux LVM, XFS, VMFS5（Smart Sector backup for 2TB or less）, VMFS6（Full Sector backup only）
- Cold backup supports ESXi 6.5 / 6.7 / 7.0
- The above file systems on MBR and GPT disks are supported.
- The above mentioned file systems of virtual disks on Storage Space configured with Windows 8 or later are supported.
Backup Destination :
- Local Disk（Internal /External）：HDD / SSD with ATA / SATA / eSATA / SCSI / SAS / FireWire (IEEE 1394) connection、Virtual hard disk created on the storage space
- Network Drive: Network drive with NAS（Network shared folders compatible with file sharing SMB/CIFS protocol , shared folders of Windows OS and Samba） / iSCSI / SAN connection
- Cloud Storage：Amazon S3, Azure Storage, S3 compatible object storage (Nifty Cloud, Cloudian)、Wasabi
- HDD / SSD / RDX / Flash memory with USB connection
- SFTP Server
- Please refer here to check how to use iSCSI.
- SAN (fibre channel) can be used only when the driver is loaded in the boot environment.
- As for the supported destination storage when backing up in boot environment, please refer to Knowledge Base
- As for mounting nfs share in CentOS-based boot environment, please refer to Knowledge Base
Actiphy Boot Environment Builder
CPU :
Pentium 4 or above
Main Memory :
1024MB or above
Hard Disk :
2048 MB or more of available disk space
Internet Connection :
Required for update of the product
- If you use a proxy server for internet access, click on [?] and configure the proxy settings.
Screen Resolution :
1152 x 864 (XGA+) or above. Display scale is 100%.
Operating System :
Windows 10 (x64) or later version of Windows Desktop OS, Windows Server 2012 R2 or later version of Windows Server OS
- Using Windows RE with the BE Builder fails to create a boot environment on Windows Server 2012 R2 or in an environment where recovery partitions are not present.
Windows ADK :
ADK for Windows 10, Version 1703 or later (ADK for Windows 11, Version 22H2 is not supported.)
The following components are required:
- Deployment Tools
- Windows Preinstallation Environment（Windows PE）
If the Windows ADK for Windows 10 1809 or later was downloaded, please install the Windows Preinstallation Environment (Windows PE) from “Windows PE Add-on for the ADK”.
ActiveImage Protector 2022 IT Pro
Hardware
CPU :
Pentium 4 or above
Main Memory :
2GB or above
Hard Disk :
650MB or more of available disk space
- Installation of the related products requires available space for the respective products.
DVD-ROM Drive :
Required to install the product and boot up the ActiveImage Protector Boot Environment.
Internet connection :
Required for online activation of the product, issuing a license file and installation of the latest updates
Operating System
Windows：
- Windows Server 2022
- Windows Server 2019
- Windows Server 2016
- Windows Server 2012 R2
- Windows Server IoT 2019/2022 for Storage
- Windows Storage Server 2016
- Windows Storage Server 2012 R2
- Later than Windows 10 1803（x64）,including Windows 11
Hypervisor：
- Windows Server 2022 Hyper-V
- Windows Server 2019 Hyper-V
- Windows Server 2016 Hyper-V
- Windows Server 2012/2012 R2 Hyper-V
- VMware vSphere ESX[i] 5.1 / 5.5 / 6.0 / 6.5 / 6.7/ 7.0
- Citrix Hypervisor 8.2
- Proxmox VE 7.2-1
- Nutanix Acropolis Hypervisor (AHV) 20190916.276
- The operating systems above stated as guest OS of virtual machines on the respective hypervisors are also supported.
- As for the backup source OS for HyperAgent, please refer to our knowledge Base
- HyperAgent feature is not available on ActiveImage Protector Server vPack. and IT Pro.
- HyperBack (agentless backup) feature is not available on Citrix Hypervisor、Proxmox VE and Nutanix AHV.
- For the support information about the other hypervisors, please contact us.
File System
Hot Imaging Backup :
FAT16, FAT16X, FAT32, FAT32X, NTFS, ReFS
- The above listed file systems on MBR and GPT disks are supported.
- Support for the above mentioned file systems of virtual disks on Storage Space configured with Windows 8 or later OS.
- ReZooming a virtual machine created in ReFS is not supported.
Cold Imaging in Boot Environment（Linux）:(except for IT Pro)
FAT16, FAT16X, FAT32, FAT32X, NTFS, Linux Ext2, Linux Ext3, Linux Ext4, Linux Swap, Linux LVM
- Actiphy Boot Environment Builder supports building “Boot Environment.”
Cold Imaging in Actiphy Boot Environment（Windows RE/PE）or RescueBoot :
FAT16, FAT16X, FAT32, FAT32X, NTFS, exFAT, ReFS, Linux Ext2, Linux Ext3, Linux Ext4
- RescueBoot is not available for ActiveImage Protector IT Pro.
- Backup and Recovery of Linux are not supported with ActiveImage Protector IT Pro
- File system on Storage Space and ReFS are supported only if the boot environment is created by using Windows ADK that supports the file system.
- Actiphy Boot Environment Builder or ActiveImage Protector IT Pro Creator support building “Boot Environment”.
Backup Destination
- Local Disk（Internal /External）：HDD / SSD with ATA / SATA / eSATA / SCSI / SAS / FireWire (IEEE 1394) connection、Virtual hard disk created on the storage
- Network Drive: Network drive with NAS（Network shared folders compatible with file sharing SMB/CIFS protocol , shared folders of Windows OS and Samba） / SAN connection
- Cloud Storage：Amazon S3、Azure Storage
- HDD / SSD / RDX / Flash memory with USB connection
- LTO （magnetic tape）
- SFTP Server
- Storage media of which the sector size is 512 bytes or more is supported.
- SAN (fibre channel) can be used only when the driver is loaded in the boot environment.
- As for verified LTO device, please refer to Knowledge Base
Actiphy Boot Environment（Windows PE / RE）
Main Memory :
2GB or above
DVD-ROM Drive :
Required to install the product and boot up the ActiveImage Protector Boot Environment.
Others :
System requirements for Deduplication feature are as follows:
- A volume with available space of 1% or more of the total volume size of the backup source as the working area to back up using deduplication other than the storage space for backup image files.
- CPU: Dual core processor or above (recommended) ,/li>
- Main Memory: 8GB or above (recommended)
- Intel Itanium（IA-64）based systems are not supported.
File System :
FAT16, FAT32, NTFS, exFAT, ReFS
- The above file systems on MBR and GPT disks are supported.
- The above mentioned file systems of virtual disks on Storage Space configured with Windows 8 or later are supported.
- exFAT is supported with full-sector backup.
Backup Destination :
- Local Disk（Internal /External）：HDD / SSD with ATA / SATA / eSATA / SCSI / SAS / FireWire (IEEE 1394) connection、Virtual hard disk created on the storage
- Network Drive: Network drive with NAS（Network shared folders compatible with file sharing SMB/CIFS protocol , shared folders of Windows OS and Samba） / SAN connection
- Cloud Storage：Amazon S3、Azure Storage
- HDD / SSD / RDX / Flash memory with USB connection
- LTO（magnetic tape）
- SFTP Server
- Storage media of which the sector size is 512 bytes or more is supported.
- SAN (fibre channel) can be used only when the driver is loaded in the boot environment.
- As for verified LTO device, please refer to Knowledge Base
ActiveImage Protector IT Pro Creator
CPU :
Pentium 4 or above
Main Memory :
1024MB or above
Hard Disk :
2048 MB or more of available disk space
Internet Connection :
Required for update of the product
- If you use a proxy server for internet access, click on [?] and configure the proxy settings.
Screen Resolution :
1152 x 864 (XGA+) or above. Display scale is 100%.
Operating System :
Windows 10 (x64) or later version of Windows Desktop OS, Windows Server 2012 R2 or later version of Windows Server OS
- Using Windows RE with the BE Builder fails to create a boot environment on Windows Server 2012 R2 or in an environment where recovery partitions are not present.
Windows ADK :
ADK for Windows 10, Version 1703 or later (ADK for Windows 11, Version 22H2 is not supported.)
The following components are required:
- Deployment Tools
- Windows Preinstallation Environment（Windows PE）
If the Windows ADK for Windows 10 1809 or later was downloaded, please install the Windows Preinstallation Environment (Windows PE) from “Windows PE Add-on for the ADK”.
Others
System requirements for Deduplication are as follows :
- A volume with available space of 1% or more of the total volume size of the backup source is required as the working area other than the storage space for backup image files.
- CPU: Dual core processor or above (recommended)
- Main Memory: 8GB or above (recommended)
- Intel Itanium（IA-64）based systems are not supported.